Tetrion Make Good Seal & Waterproof 400Ml
Description
Tetrion TWP400 Make Good Seal & Waterproof 400ml
Tetrion Seal & Waterproof is a visco-elastic and abrasion resistant, durable coating which gives effective, heavy duty protection and sealing power to flat roofing, metal panels and even vertical surfaces. It is thixotropic, meaning thick films can be achieved quickly. It gives excellent protection from water ingress and dampness.
Tetrion Make Good Seal and Waterproof offers corrosion protection, excellent adhesion to metal, gutters, driveways, pipework and a protective overcoat for sheds. It is water resistant and can be applied in all weather conditions.
ADVANTAGES
Self healing, non-drying film
Prevents water ingress
Sound deadening
Black bitumen base
Does not run or sag
Excellent adhesion
APPLICATION
Remove all loose dirt & debris from the area to be coated. If required, clean and thoroughly dry the area.
Remove any previous surface coatings with a wire brush & abrasive paper
Lightly sand with a finer abrasive paper to give a good key and re-clean & dry
Shake the aerosol can vigorously for 2 minutes minimum
Firstly test spray on a small inconspicuous area, to check spray rate, pattern and compatibility
Apply in short even coats. Do not flood. Apply a lighter coats to avoid runs. Apply 2 or 3 light coats, allowing 15 minutes to dry between coats
If spray button clogs, invent can and spray to release. Clean overspray and spillages with white spirit-type solvent
Paint film should be touch dry in 2-3 hours and through-dry in 5-6 hours
Specifications
Lead Time
3
Application
Sealant
Brand
tetrion
Categories
Sealants
Category
Specialist Sealants
Manufacturer
Tetrosyl Limited
Size
400ml
Type
Specialist Sealants
